Push Pull, Female panel mount connector, IP67, shieldable, Contacts: 8 | 09 4832 81 08

Menu

Menu

Products
Miniature connectors
Push-Pull IP67
Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting

Illustration 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — Illustration

3D View 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — 3D View

Component part drawing 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — Component part drawing

Scale drawing 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — Scale drawing

Assembly instructions / Panel cut-out 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 4832 81 08 - Push Pull Female panel mount connector, Contacts: 8, shieldable, solder, IP67, Front mounting — Contact arrangement (Plug-in side)

Part no.	09 4832 81 08
Connector design	Female panel mount connector
Version	Connector socket straight
Connector locking system	Push-Pull
Termination	solder
Degree of protection	IP67
Connection cross-section	0.75 mm² / AWG 18
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 1000 Mating cycles
Weight (g)	21.46
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	60 V
Rated impulse voltage	500 V
Rated current	5.0 A
Insulation resistance	≥ 10¹⁰ Ω
Pollution degree	1
Overvoltage category	I
Insulating material group	III
EMC compliance	shieldable
Shield connection	Shield on the housing

Contact body material	PBT (UL94 V-0)
Contact material	CuSn (bronze)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	423a577e-3d7c-439a-a999-2e380ec22c64
PFAS present	yes

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".

Downloads

Data sheet 09 4832 81 08

CAD files

Select required format