Menu
Back
  1. Products
  2. Miniature connectors
  3. Push-Pull IP67
  4. Push Pull Male panel mount connector, Contacts: 6, unshielded, solder, IP67, front fastened
Part no.: 09 4819 80 06

Push Pull Male panel mount connector, Contacts: 6, unshielded, solder, IP67, front fastened

Push-Pull, series 440, Miniature Connectors
Available numbers of contacts
Compare product
Downloads
General features
Moreless
Part no. 09 4819 80 06
Connector design Male panel mount connector
Version Connector pin straight
Connector locking system Push-Pull
Termination solder
Degree of protection IP67
Cross-sectional area 0.75 mm² / AWG 18
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 1000 Mating cycles
Weight (g) 19.35
Customs tariff number 85369010
Country of Origin DE
Rated voltage 125 V
Rated impulse voltage 800 V
Rated current 5.0 A
Insulation resistance ≥ 1010 Ω
Pollution degree 1
Overvoltage category I
Insulating material group III
EMC compliance unshielded
Contact body material PBT (UL94 V-0)
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 0ec1101a-d31a-4554-9e48-5fb6df79a1b9
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 09 4819 80 06
PDF
REACH
09 4819 80 06
PDF
RoHS
09 4819 80 06
PDF
China RoHS
09 4819 80 06
PDF
CAD files
Select required format
Push-Pull IP67
09 4819 80 06