99 5105 60 03 | binder M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version

Menu

Menu

Products
Miniature connectors
M16 IP67
M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version

Illustration 99 5105 60 03 - M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version — Illustration

Scale drawing 99 5105 60 03 - M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version — Scale drawing

Assembly instructions 99 5105 60 03 - M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version — Assembly instructions

Contact arrangement (Plug-in side) 99 5105 60 03 - M16 IP67 Male cable connector, Contacts: 3 (03-a), 4.1-7.8 mm, shieldable, solder, IP68, Short version — Contact arrangement (Plug-in side)

Part no.	99 5105 60 03
Connector design	Male cable connector
Version	Connector pin straight
Connector locking system	screw
Termination	solder
Degree of protection	IP68
Cross-sectional area	max. 0.75 mm² / AWG 18
Cable outlet	4.1-7.8 mm
Temperature range from/to	-30 °C / 95 °C
Mechanical operation	> 500 Mating cycles
Additional information	Short version
Weight (g)	0.00
Customs tariff number	85369010

Rated voltage	150 V
Rated impulse voltage	1500 V
Rated current (40 °C)	7.0 A
Pollution degree	2
Overvoltage category	II
Insulating material group	III
EMC compliance	shieldable
Shield connection	cable clamp

Housing material	CuZn (Brass nickel plated)
Contact body material	PBT
Contact material	CuZn (brass)
Contact plating	Ag (silver)
Locking material	CuZn (brass)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	07279b7f-77d2-4cec-9b4e-7c62f9a560ea

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)
RoHS Directive	2011/65/EU (EN 50581:2012)

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).

Downloads

Data sheet 99 5105 60 03

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

Declaration of conformity

UKCA declaration of conformity

STP-Data 99 5105 60 03