09 3427 86 08 | binder M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened

Menu

Menu

Products
Automation technology - Sensors and actuators
M8
M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened

Illustration 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Illustration

3D View 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — 3D View

Scale drawing 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Scale drawing

Assembly instructions / Panel cut-out 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Assembly instructions / Panel cut-out

Contact arrangement (Plug-in side) 09 3427 86 08 - M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, front fastened — Contact arrangement (Plug-in side)

There is a newer version of this article

Direct comparison old/new version

Automation Technology - Sensors and Actuators--Male panel mount connector_718_3_FS_front_konf

76 6319 1111 00008-0200

M8 Male panel mount connector, Contacts: 8, unshielded, single wires, IP67, UL, front fastened

M8, series 718, Automation Technology - Sensors and Actuators

Part no.	09 3427 86 08
Connector design	Male panel mount connector
Type standard	DIN EN 61076-2-104
Wire length	0.2 m (Standard 0.2 m. Other lengths are available on request).
Version	Connector pin straight
Connector locking system	screw
Termination	single wires
Degree of protection	IP67
Cross-sectional area	0.14 mm² / AWG 26
Temperature range from/to	-40 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	8.00
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	30 V
Rated impulse voltage	800 V
Rated current	1.5 A
Pollution degree	3
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	Zinc die-cast nickel-plated
Contact body material	PA black
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	b477300f-aae2-4894-9f01-9b129de00126

eCl@ss 11.1	27-44-01-03
ETIM 9.0	EC003569

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm).

Downloads

Data sheet 09 3427 86 08

CAD files

Select required format