Menu
Back
  1. Products
  2. Automation technology - Voltage and Power Supply
  3. M18
  4. M18 Male panel mount connector, Contacts: 4, unshielded, THT, IP67, front fastened
Part no.: 09 0441 90 04

M18 Male panel mount connector, Contacts: 4, unshielded, THT, IP67, front fastened

M18, series 714, Automation Technology - Voltage and Power Supply
Compare product
Downloads
General features
Moreless
Part no. 09 0441 90 04
Connector design Male panel mount connector
Version Connector pin straight
Connector locking system screw
Termination THT
Degree of protection IP67
Cross-sectional area 1.50 mm² / AWG 16
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 50 Mating cycles
Weight (g) 10.76
Customs tariff number 85369010
Country of Origin DE
Rated voltage 250 V
Rated impulse voltage 4000 V
Rated current 16.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Housing material PBT/PA
Contact body material PUR/PA
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 6c969738-9642-4a82-b0a6-76bb583c88d5
eCl@ss 11.1 27-44-01-09
ETIM 9.0 EC003569
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads
Data sheet
Data sheet 09 0441 90 04
PDF
REACH
09 0441 90 04
PDF
RoHS
09 0441 90 04
PDF
China RoHS
09 0441 90 04
PDF
CAD files
Select required format
M18
09 0441 90 04