Part no.: 77 1427 0000 50004-0500
7/8" Male angled connector, Contacts: 4, unshielded, moulded on the cable, IP68, UL, PUR, black, 4 x 1.50 mm², 5 m
7/8", series 870, Automation Technology - Voltage and Power Supply
General features
MorelessPart no. | 77 1427 0000 50004-0500 |
Connector design | Male angled connector |
Cable length | 5 m (Standard 2 m and 5 m. Other lengths are available on request.) |
Version | Connector pin angled |
Connector locking system | screw |
Termination | moulded on the cable |
Degree of protection | IP68 |
Cross-sectional area | 1.50 mm² / AWG 16 |
Temperature range from/to | -25 °C / 80 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 264.00 |
Customs tariff number | 85444290 |
Electrical parameters
MorelessRated voltage | 300 V (600 V UL) |
Rated impulse voltage | 2500 V |
Rated current | 10.0 A |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | I |
EMC compliance | unshielded |
Material
MorelessHousing material | PUR |
Contact body material | PUR |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | e60ebabc-5ff4-4cfc-99e6-5ff60a94d6da |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelesseCl@ss 11.1 | 27-06-03-11 |
ETIM 9.0 | EC002638 |
Declarations of conformity
MorelessLow Voltage Directive | 2014/35/EU (EN 60529:1991;EN 60204-1:2018) |
Cable data
MorelessStructure of the cable | |
Cable diameter | 8.0 mm |
Cross section | 4 x 1.50 mm² |
Sheath material | PUR |
Single-lead insulation | PP |
Single-lead structure | 84 x 0.15 mm |
Cable color | black |
Electrical properties | |
Conductor resistance | 13.3 Ω/Km (20°C) |
Mechanical properties | |
Bending radius, fixed cable | ≥ 7.5 x Ø |
Bending radius, moving cable | ≥ 10 x Ø |
Bending cycles | 5 million |
Permitted acceleration | 5 m/s² |
Travel distance, horizontal | 20 m |
Travel speed | ≤ 300 m/min |
Thermal properties | |
Temperature range cable in move from/to | -30 °C / 80 °C |
Temperature range cable fixed from/to | -50 °C / 80 °C |
Other features | |
Halogen free | yes |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
- To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).
Downloads
Data sheet
Data sheet 77 1427 0000 50004-0500
download
Certificates
UL certificate
download
REACH
77 1427 0000 50004-0500
download
RoHS
77 1427 0000 50004-0500
download
China RoHS
77 1427 0000 50004-0500
download
Declaration of conformity
Low Voltage Directive
download
UKCA declaration of conformity
Electrical Equipment
download
CAD files
Select required format