09 2472 00 05 | binder 7/8" Lead-through for control cabinet, Contacts: 5, unshielded, pluggable, IP67, VDE

Menu

Menu

Products
Automation technology - Voltage and Power Supply
7/8"
7/8" Lead-through for control cabinet, Contacts: 5, unshielded, pluggable, IP67, VDE

Illustration 09 2472 00 05 - 7/8 — Illustration

Scale drawing 09 2472 00 05 - 7/8 — Scale drawing

Contact arrangement (Plug-in side) 09 2472 00 05 - 7/8 — Contact arrangement (Plug-in side)

Part no.	09 2472 00 05
Connector design	Lead-through for control cabinet
Version	Adapter
Connector locking system	screw
Termination	pluggable
Degree of protection	IP67
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 100 Mating cycles
Weight (g)	122.37
Customs tariff number	85369010
Country of Origin	CZ

Rated voltage	300 V
Rated impulse voltage	4000 V
Rated current	6.0 A
Pollution degree	3
Overvoltage category	III
Insulating material group	I
EMC compliance	unshielded

Contact body material	PUR
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	f6c29127-c1a9-4f8e-96d7-3e1be735e103

Approvals	VDE

eCl@ss 11.1	27-44-01-09
ETIM 9.0	EC003569

Low Voltage Directive	2014/35/EU (EN 60204-1:2018;EN 60529:1991)

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
To lock the cable connector to the device connector, we recommend tightening the threaded ring to 1.5 Nm. A suitable torque wrench is available as an accessory (order no. 07 0082 000).

Downloads

Data sheet 09 2472 00 05

VDE certificate

Declaration of conformity

Low Voltage Directive

UKCA declaration of conformity

Electrical Equipment

STP-Data 09 2472 00 05